Green Light, But Poor Coverage - weBoost eqo U474020 Guide De L'utilisateur

______
(TROUBLESHOOTING cont.)
signal boost, more advanced troubleshooting may be necessary through
weBoost Customer Support at support.weboost.com or contact 866.294.1660.
Light Off
If the eqo Booster's light is off, verify your surge protected power strip has power.
Note: The eqo Booster can be reset by un-plugging and re-plugging the power
supply from the power strip.

Green Light, But Poor Coverage

After each step, always un-plug and re-plug the power supply so the Booster can
update the signal reading. Always un-plug and re-plug from a power strip NEVER
from the Booster.
1 Increase separation between Antenna and Booster. Un-plug and re-plug power
supply from power strip.
2 Rotate the Booster in small increments 5-10 degrees at a time. Un-plug and re-plug
power supply from power strip each time.
3 Move the Booster to a different location. The stronger the signal at the Booster
location, the better chance of improved coverage from the Antenna. Un-plug and
re-plug power supply from power strip.
4 To determine what your signal is like before and after you power on the Booster,
refer to STEP 1 on page 2 - Find The dBm Reading On Your Phone.
Unable To Get The Coverage
Needed?
NEED HELP?
CELL PHONE SIGNAL BOOSTER
support.weboost.com 866.294.1660
9