User Manual - jaz AIRON Mode D'emploi

UK

USER MANUAL

Charging the earbuds
Insert the earbuds into the charging case, the LED will light up. When
charging is complete, it will turn off.
Charging the case
Charging via cable
Plug the Type C connector of the supplied cable into the Type C port on the
case and the other end into a USB port.
The LED on the case will flash and remain steady when charging is
complete.
Turning on the earbuds
Take the earbuds out of the charging case, they will automatically turn on
and pair with each other.
Or press both MLF buttons on the earbuds for 5 seconds,
Turning off the earbuds
When you put the TWS earphones into the case, they will turn off
automatically.
Alternatively, press the MLF button on one of the earbuds for 5 seconds.
Pairing with devices
1. Take the earbuds out of the charging case: they will turn on and pair
with each other automatically
2. Turn on Bluetooth on the device and search for ""JAZ AIRON"" in the list
of available devices, then select it.
3. After the first pairing with the device (if Bluetooth is turned on), the
earbuds will automatically pair every time they are taken out of the case.
Action
Play/pause music
Voice assistant
Previous track
Next track
Answer a call
End a call
Reject a call
Recall last number
4
Command
1 tap
3 taps
2 seconds
2 seconds
1 tap
1 tap
2 seconds
2 taps
Key
Left / right
Left / right
Left
Right
Left / right
Left / right
Left / right
Left / right