Antec P160W Manuel De L'utilisateur page 8

All manuals and user guides at all-guides.com
The rear 120mm fan is installed so that the air blows out of the case. Connect
the power supply to the fan by using the 4-pin connector.
The optional front fan should be installed so that the air blows into the case
from the front. For Quiet Computingä we recommend that you NOT install the
front fan unless necessary for cooling, since it will create additional noise. To
mount the front fan:
1. Un-screw the thumbscrew and pull the fan bracket out.
2. Install the fan into the bracket.
3. Carefully guide the fan cable through the cut-out on the side of the bracket
while inserting the fan bracket into the slot.
4. Tighten the thumbscrew.
Maintaining the Washable Air Filter
The P160 includes a washable air filter behind the front grill. To access it, sim-
ply remove the front bezel. Initially, we recommend washing the air filter at
least once a month. By keeping the air filter clean, you'll help your system
remain stable and cool.
Antec Quality 3-Year parts and labor warranty (AQ3)
See details at: http://www.antec.com/warranty.html
7