Remote Control; Fcc Statement - Insignia IS-HDPLTV42 Guide De L'utilisateur

IS-HDPLTV42 42-inch HDTV

Remote control

Symptom
Remote
control does
not operate.
Maintenance
Warning
Use a dust cloth to clean the exterior of your HD TV. Use caution
when cleaning or wiping plastic parts. If necessary, use a cloth lightly
dampened with mild soap and water to clean the exterior. Do not use
abrasive cleaners or solvents because they may damage your HD TV.
Legal

FCC STATEMENT

FCC N
OTICE
CLASS B
DIGITAL DEVICE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment.
Possible cause
The remote control is not
aimed at the sensor.
Distance is too far or too
much light in the room.
There is an obstacle in the
path of the beam.
The batteries are weak.
The batteries are not
inserted correctly.
The wrong input source may
be selected.
To prevent fire or shock hazard, disconnect your HD TV from the
AC power source when you clean your TV.
www.insignia-products.com
Possible solution
Aim the remote control at
the Remote sensor.
Operate within 23 feet or
reduce the light in the room.
Clear the path of the beam.
Replace the batteries.
Insert correctly.
Press TV1 to control your
HD TV.
29