Shelves
To prevent damage to the door seal, make sure the door is open before pulling the shelves to install or
remove the bottles.
For easier access to the contents of shelves you need to slide the shelf outward about 1/3 however they
are designed with a stop on each side to prevent the bottles from falling.
To remove or position the shelves, tilt the shelf as shown in the diagram and pull or push as required.
LOADING
The maximum number of bottles that can be loaded into the cabinet are for information only; this
information is not contractual; it provides a means for rapidly estimating the size of the device.
The information comes from tests carried out using standard bottles; in reality, in extreme conditions it
would be possible to load a greater number of bottles without racks, but a "diverse wine cellar" is used in
many different ways; the daily use of a wine cabinet means that it must carry fewer bottles. Therefore you
will probably load fewer bottles then the given maximum numbers.
How to load and care for your wine cabinet:
78.1
76.4
82.2
7 6 .5
566.3
516.5
496.2
476
474
429.7
387.2
389.9
387.2
168.7
183.1
153.7
Here we see 4 types of 75 cl bottles, Burgundy and Bordeaux, of different sizes.
There are many other types, with various volumes and of all shapes.
Note the different ways they are stored depending on the height and diameter of the bottles as well as the
interleaving method used.
Loading for Max capacities
The maximum number of stored bottles is based on standard Bordeaux bottles containing 0.75 L.
57