iComfort IC1004 Manuel De L'utilisateur page 10

6. INSTAllATION
The chair is packed in semi knock-down form consisting of 2 parts, back,
seat.
Check the Packing list to make sure no parts are missing.
Assemble the chair carefully and according to the Assembly Instruction pro-
vided.
Do not substitute the missing parts with your own. If anything is missing
contact the shop and ask for replacement.
Do not assemble the chair with damaged parts.
once the chair is set up according to the Assembly Instruction, place the
chair with sufficient space in front and behind it.
make sure there is an allowance of more than 50cm behind the chair and
more than 50cm in front of the chair.
Make sure that the floor is even and smooth. Do not place the chair on
uneven floor.
As per safety instruction, the room must not be too hot (below 40) or humid
or it may cause mal function and electric shock.
7. mAIN SwITCH OF CHAIR
The main switch of the chair is located on the back of the right armrest. To
turn on the functions of the chair you must first turn on this switch, before
turning on the remote control. once you finish using the massage functions,
do not forget to turn off the main switch.
10
IC1004.indd 10 31/05/07 08:00:18