Charging The Headset; Pairing With A Bluetooth® Device; Using The Headset; Answering A Call - Spracht ZuM Maestro Headset BT HS-2050 Guide De L'utilisateur

Charging the Headset

Before you can use your headset, you must charge it. Plug the AC Adapter into
the base and a wall outlet. Place the headset in the base to charge it; the red
LED will be on. The LED will switch to green once charging is complete. If you
take the headset off the base it will go into stand-by mode. If no pairing is active,
the headset will shut down to preserve the charge in the battery.
Setup
Pairing with a Bluetooth® Device
First, make sure that Your device, smart phone or Mac/PC, has Bluetooth®
functionality. Activate the Bluetooth® function on your device.
Turn on your headset
1. Press the Multi-Function button for at least 6 seconds (for location of the
button, see item 5 on the diagram opposite). The LED (item 4) will alternately
flash red and blue, which indicates the headset is in pairing mode.
2. On your device, search for Bluetooth® devices. You should see ZūMBT when
you select Discover or Add on your device. Select ZūMBT to begin pairing.
You may need to enter the PIN code "0000" if your device requests it.
3. When the pairing is successful, the LED will turn solid blue and the ZūMBT™
icon will show on your device. You can make calls, listen to music, or use it
for Skype™. You should not have to pair again: you can reconnect by pressing
the icon.
4. If pairing did not succeed, turn the headset OFF, and repeat steps 1–3.
5. Zūm Maestro BT™ can pair with 2 devices simultaneously. To begin, turn off the
Bluetooth® function on your first device.
• Power the headset OFF.
• Repeat steps 1-3 on the second device.
• When pairing is successful, turn on the Bluetooth® function on your first
device. You are now paired to 2 devices.
6. If no device is paired within 120 seconds of beginning pairing mode, the
headset will shut down to save power.

Using the Headset

Answering a Call

Spracht®
1