Installing The Software - RocketFish RF-HD25 Guide De L'utilisateur

If the drive is correctly detected, a new drive letter is assigned
(for Macs, the new drive letter appears on your desktop) and the
Safely Remove Hardware icon appears on the bottom right side
of your taskbar.
Notes for Windows users:
If you do not see an additional drive in your system, you
must partition and format the new hard drive. Use Disk
Management in Windows 2000 or Windows XP.
Notes for Mac users:
Mac 8.6 - 9.2x
Highlight the Drive Icon, then select Finder > Special > Erase
Disk from the top menu bar.
Mac OS 10.x
Select Disk Utilities from the utilities folder, then choose your
external enclosure and partition and format the drive to
meet your requirements.

Installing the software

Installing the USB driver
Installing the Windows 2000, Windows XP, and
Windows Vista drivers
Before installation, make sure that your operating system has
the latest service pack installed (Windows 2000 - SP4, Windows
XP - SP2). No additional driver is required.
Installing the Mac OS 8.6, 9.x, or 10.x drivers
Before installation, make sure that you update the USB
extension to v1.4.1 (Mac OS 8.6). No additional driver is
required.
RF-HD25
9