RocketFish RF-HD25 Guide De L'utilisateur page 10

Connecting the enclosure to your computer
To connect the enclosure to your computer:
• Prior to inserting the Drivers and Utilities CD (if required),
plug a USB 2.0 cable into the enclosure, then plug it into
your computer. We provide a USB 2.0 Y cable in the
package, which has two standard USB A male-type
connectors. One connector is for data and bus power
and the other connector is for additional power, if
required. When you connect the USB 2.0 Y cable to your
computer, use both A male-type connectors to make
sure the enclosure has sufficient power.
USB 2.0 A male-type
connector for data
and bus power
The operating system automatically detects and sets up the
new drive.
8
USB 2.0 A male-type
connector for
additional power