Controls; Specifications - NEC Audio Base Mode D'emploi

Controls

Power: Press the power button to turn the audio base on or off. An indicator light
next to the power button will glow to show power is on.
Volume: Turn this control clockwise to increase volume level and counterclockwise
to decrease volume level.
Headphone Output Jack: Headphones can be used to listen to audio in private.
When the headphone plug is inserted into the headphone jack, the speakers are
automatically disconnected and sound is heard through the headphones.
NOTE: Headphones not included. The headphone plug required is a mini stereo
type measuring 3.5mm (

Specifications

Speakers
Power
Input Impedance
Input Sensitivity
Frequency response
Power Requirements
Current Rating
Headphone Jack Type
Audio Input Plug Type
Dimensions
Weight
Environmental Considerations
Operating Temperature
Humidity
Altitude
Storage Temperature
Humidity
Altitude
System Hardware Requirements
Note: Technical specifications are subject to change without notice.
AudioBase
/ ").
1
8
Two 2.2 inch / 57mm full range
1 + 1 Watts @ 8 Ohms with 10% THD
> 10k Ohms
500mV input for full output
150Hz - 10kHz
AC 100-240V
3.15A (Audio 0.15A. AC OUT 3A)
3.5mm Stereo
3.5mm Stereo
10.2 in (W) x 1.8 in (H) x 9.5 in (D)
260mm (W) x 45mm (H) x 243mm (D)
1.6 lbs / 0.72kg
0° C to 35° C
30% to 80% (Non-Condensing)
0 to 10,000 Feet
-20° C to +60° C
10% to 90%
0 to 45,000 Feet
PC or MAC with sound capabilities
4
6 10/24/00, 3:13 PM