Bosch GLI 14,4 V-LI Professional Notice Originale page 9

All manuals and user guides at all-guides.com
OBJ_BUCH-938-001.book Page 9 Monday, February 16, 2009 11:35 AM
To remove the battery 5, press the battery unlocking button 4 and
pull the battery out of the cordless worklight toward the rear. Do not
exert any force.
Changing the Light Bulb (see figure A)
Before any work on the cordless worklight, remove the battery.
Exercise caution when changing the light bulb! Do not touch the
hot light bulb. Allow the light bulb to cool down for at least 10
minutes. Danger of burns from the hot light bulb.
Note: Use a soft cloth for changing the light bulb. Make sure not to
touch the glass bulb with your bare fingers. Otherwise, the light bulb
can become damaged.
– Press the release buttons 6 and remove the lamp head 1.
– Turn the light bulb 7 until the V-groove 8 in the light bulb 7 corre-
sponds with the V-groove in the lamp socket and then pull out the
light bulb 7.
– A spare light bulb 9 is located in the lamp head 1.
– Insert the new light bulb 7 and turn until locked.
– Mount the lamp head 1 again.
Bosch Power Tools
English | 9
1 609 929 T65 | (16.2.09)