Resolving Malfunctions - essentiel b ECAVD185-70b1 Notice D'utilisation

Resolving malfunctions

A malfunction may be due to a minor problem that you could solve yourself using
the instructions below. Before calling your retailer's after-sales service, carry out
the following checks:
1) Your appliance is not working:
Check:
That it is plugged in correctly,
•
That the circuit breaker has not been deactivated.
•
2) The appliance is cooling too much:
The temperature is set too high.
•
3) The appliance is not cooling enough:
You may have stored hot food or too much food in the appliance.
•
The door may not be closed properly.
•
The door seals may be damaged.
•
The temperature may not be set properly.
•
4) The door is difficult to open:
You may have difficulties opening the door if you have just closed it. When the
•
door is open, cold air that escapes from the tank is replaced by room temperature
air. During the process of cooling this hot air, a vacuum is created and the door
becomes difficult to open. After a few minutes, normal pressure should return
and you should be able to open the door easily again.
If the above tips have not helped to resolve the problem, do not attempt to repair
the appliance yourself. Instead, contact your retailer's after-sales service.
IMPORTANT: Only maintenance technicians are able to perform repairs on
this appliance. Improperly executed repairs may be hazardous to the user
and are not covered by the warranty.
LED interior light
Your appliance is equipped with LED lighting. This type of lighting is designed to
•
last longer than a conventional bulb. Contact your retailer's after-sales service in
the event of defective lighting.
All manuals and user guides at all-guides.com
61
V.1.0
troubleshooting guide