unpacking
Remove the transportation packaging.
•
Check that the appliance has not been damaged during transport. You should
•
never connect a damaged appliance! If the appliance is damaged, please
contact your retailer.
Remove all adhesive tape and packaging materials from the appliance's interior
•
and exterior.
Before first use
Clean the interior of the appliance and all accessories provided using warm
•
water and a small amount of white vinegar. Do not use soap or detergent as the
smell may persist. After cleaning, make sure to completely dry the appliance.
You can use mineral spirits to remove any adhesive left on the appliance's
•
exterior.
You should always disconnect the appliance, or remove the fuses/switch
•
off the circuit breaker when cleaning the appliance.
installation
Where to install
Position your appliance on a stable, flat surface. Your appliance will become
•
heavy once it has been loaded with food and must be placed on a solid and
resistant floor.
The appliance must be installed in a dry, well-ventilated room at ambient
•
temperature (minimum 10°C and maximum 43°C).
The appliance should not be exposed to direct sunlight.
•
The appliance should not be exposed to rain.
•
The appliance should not be installed next to a radiator, stove or any other heat
•
source.
The power consumption and effective functioning of this appliance are
•
affected by the ambient temperature.
46
V.1.0
installation
All manuals and user guides at all-guides.com