HoMedics SHIATSU XL Mode D'emploi page 5

POWER BUTTON
To turn on the massage functions, first press the
power button. The LED indicator will illuminate.
SEAT VIBRATION
Press the seat vibration button to enjoy a mild
vibration massage in the seat cushion.
SHIATSU MODE
To activate the shiatsu massage, press the
"SHIATSU" button. There are 2 modes to choose
from – synchronous and asynchronous. Select your
mode by pressing the "SHIATSU" button once for
synchronized shiatsu movement, and again for
asynchronous movement. The corresponding LED
lights will illuminate.
ROLLING MODE
To activate the rolling massage, press the
"ROLLING" button. There are 4 node positions
to choose from. Select your node position by
pressing the "ROLLING" button once for position
1, again for position 2, again for position 3, and
once more for position 4. The corresponding LED
lights will illuminate.
8
DEMO BUTTON
For a brief demonstration of the features of the massage
cushion, press the "DEMO" button. The LED light above
the button will illuminate to indicate active function.
The unit will briefly go through each function. Once
completed, the unit automatically turns off.
ZONE CONTROL
Press the upper, full, or lower back button to focus the
massage action on that area of your back.
HEAT BUTTON
For soothing heat when enjoying either shiatsu massage,
press the "HEAT" button. The massage nodes will glow
red to indicate that the heat has been activated. To
turn the heat off, press the "HEAT" button again. For
your safety the heat cannot be turned on if no massage
feature is selected.
SPOT MASSAGE
While the unit is in shiatsu, press the "SPOT" button to focus
the massage action in one place. Once spot massage is
selected, you may adjust the mechanism position by holding
either the up or down arrow button until the desired position
is reached. When the desired position is reached, release the
arrow button.
9