Whirlpool CGD9060 Instructions D'installation page 11

CODE
6 01 REGULAR CYCLE PRICE (Factory Default)
6 01 When the d.xx is set to d.CS, this 6 xx value
represents the number of push-in actuations of the
coin slide to start the washer. 6 01 would equal one
coin slide activation.
6 00 When the d.xx is set to d.00, this 6 xx value
represents the number of coins needed to start the
washer; may adjust from 0–39. Change this value
by pressing the HOT button. 6 07 = 7 coins. 9060
models default to 6 00.
Press the WARM button once to advance
J
to next code.
ADDITIONAL RINSE OPTION
8 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
8 00 Not Selected 'OFF'.
8 Ar Selected 'ON'.
Press the COLD button once for this selection.
Press the WARM button once to advance
J
to next code.
9 00 CYCLE COUNTER OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
9 00 Not Selected 'OFF'.
9 0C Selected 'ON' and not able to be deselected.
Press the COLD button 3 consecutive times to select
'ON'. Once selected 'ON' it cannot be deselected.
Press the WARM button once to advance
J
to next code.
MONEY COUNTER OPTION
1. 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
1. 00 Not Selected 'OFF'.
1. 0C Selected 'ON'.
Press the COLD button 3 consecutive times to
select 'ON' and 3 consecutive times to remove
(Not Selected 'OFF'.) Counter resets by going
from 'OFF' to 'ON'.
1 C0 Selected 'ON' and not able to be deselected.
To select 'ON' and not able to be deselected,
rst select 'ON', then within 2 seconds, press
the COLD twice, HOT once, and exit the set-up
mode.
Press the WARM button once to advance
J
to next code.
2. 00 This option is not available.
b. 40 VALUE OF COIN 1
b. 05 This represents the value of coin 1 in number
of nickels: 05 = $0.25.
By pressing the HOT button, there is an option
of 1–199 nickels.
With coin slide activation, this represents the total
vend price in nickels. Example: b.40 is equal to
$2.00.
Press the WARM button once to advance
J
to next code.
All manuals and user guides at all-guides.com
EXPLANATION CODE
C. 20 VALUE OF COIN 2
C. 20 This represents the value of coin 2 in number
of nickels: 20 = $1.00.
C. 05 By pressing the HOT button, there is the option
of 1–199 nickels.
Press the WARM button once to advance
J
to next code.
d. CS COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. Press the COLD button 3
consecutive times to select/deselect this option.
d. CS Selected 'ON'. (Default for 9050 models)
When coin slide mode is selected, set 'b'. equal to
value of vend price in nickels. Set set-up code 6 xx
(regular cycle price) to number of slide operations.
If the installer sets-up 'CS' and a coin drop
mechanism is installed, the washer will not
register coins that are inserted.
d. 00 Not Selected 'OFF'. (Default for 9060 models)
Press the WARM button once to advance
J
to next code.
COIN/DEBIT OPTION
J. Cd
J. Cd Both coin and debit selected. Press the COLD
button 3 consecutive times for this selection.
(Default for 9050 models)
J. C_ Coins selected, debit disabled. Press the COLD
button 3 consecutive times for this selection.
J. _d Debit card selected, coins disabled. Press the
COLD button 3 consecutive times for this selection.
(Default for 9060 models)
J. Ed Enhanced Debit is self-selected when a Generation
2 card reader is installed in the washer. The Ed
option cannot be manually selected or deselected.
Press the WARM button once to advance
J
to next code.
n. CE CLEAR ESCROW OPTION
When selected, money held in escrow for
30 minutes without further escrow or cycle
activity will be cleared.
n 00 Not Selected 'OFF'.
n CE Selected 'ON'. Press the COLD button once for this
selection.
Press the WARM button once to advance
J
to next code.
EXPLANATION
11