Cleaning And Maintenance - Russell Hobbs RHSF3 Manuel D'instructions

TROUBLESHOOTING
If there is a fault with the fan, please see below table.
Findings
If the switch can
normally, but the fan doesn't work.
Abnormal noise is caused by the
blades.

CLEANING AND MAINTENANCE


This appliance is for household use only and is not user-serviceable.

Do not open or change any parts by yourself. Please refer to a qualified
electrical service department or return to the supplier if servicing is necessary.

Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning. Ensure that the speed control is set to "0".

It is much easier to clean the accessories directly after they have been used.
Wash them in warm, soapy water, rinse and dry well.

The body of the appliance and the stand should be cleaned with a damp cloth.
Do not let water enter the appliance or the stand.

Do not use bleach or other abrasive substance or solvents to clean your
appliance as it can be damaging to the finish.

Do not immerse the mixer in water or any other liquid, or hold it under a running
tap to clean.

To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a clean,
dry, soft cloth.

If the fan blades are cracked or damaged, please stop using the fan immediately
to avoid any danger.
*Is there power supplied to the socket?
be operated
*Has the plug been inserted to the socket?
*Is the blade blocked by anything?
*Has the fan been assembled properly?
*Has the front grill and fan housing been
properly fixed together?
*Is the blade touching the grill?
Clue for Solving the Findings
5