a. Place the smartphone on the Gimbal through the phone holder;
b. Use a 2nd smartphone and open the "MOZA Master" App,
connect it to the gimbal and enter Mimic Motion Control Mode;
c. Rotate the 2nd phone and it will control the movement of the
gimbal.
● Timelapse
Use the MOZA Master App or MOZA Genie App to connect the
gimbal, select"Creative video"button and there will be multiple
timelapse modes for shooting.
● Bidirectional Start
By default, we mount the camera handle near the tilt motor so that
the camera control port can be exposed. But in some special cases,
we need to mount the camera control port near the tilt motor for
normal use.
The following situations will require reverse mounting:
a. The camera is too wide for forward mounting.
b. The lens used is too heavy to be balanced when forward
mounting.
Reverse mounting steps:
a. Place the shorter side of the L-Bracket next to the lens and mount
it on the bottom of the camera;
b. Rotate the roll axis 180°around the roll motor, then the tilt motor will
be on the left of the roll motor.
c. Mount the shorter side of the L-Bracket to the quick release
baseplate.
● Object Tracking
Install the smartphone to Mini-P and open the MOZA Genie App,
connect the stabilizer, click the hand-shapedbutton at the bottom
of left corner to enter the object tracking mode, and select the
tracking object on the screen to start object tracking shooting.
● Inception Mode
The Inception Mode is used to control the camera to rotate in the roll
direction for shooting upside down and rotating footage. Triple press
the down button on the dial to enter the Inception Mode. Press the
left/right button on the dial then the motor rotates to the left/right
automatically.
Triple press the down button on the dial to exit the Inception Mode.
● FPV
Double-click the left button on the dialto achieve FPV wide range
follow movement. Double-click the left button of the dial to enter the
FPV Mode. In FPV mode, double-click the left button of the dial to
exit FPV mode.
a
b
8
c