General Information - Beper BG.200Y Manuel D'instructions

EN
Ice Shaver Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
Description of the product (fig.1)
1. Lid
2. Ice shaving container
3. Main body
4. Fixing knob
5. Ice size selector
6. Mixing paddle
7. Jar

GENERAL INFORMATION

This appliance is intended to be used in household.
The appliances are not intended to be operated by means of an external timer or separate remote control sy-
stem.
ALWAYS CLOSE THE LID BEFORE TURNING ON THE UNIT.
UNPLUG THE UNIT FROM THE ELECTRICAL OUTLET BEFORE TOUCHING ANY ACCESSORY, ESPE-
CIALLY THE BLADE.
Before using the unit for the first time, carefully wash the parts that come in touch with food such as lid, container,
mixing paddle and jar.
Do not insert too much ice in the container, the lid can close.
Before operating the appliance, make sure to place it on a flat and stable surface with no heat sources nearby.
Assemble all parts properly before use.
Never leave the appliance unattended while it is running.
Disconnect the electric plug from the socket after each use.
Do not immerse the main body in water or other liquids; clean it with a damp cloth.
Do not use the product if the blade is damaged, loose, curved or crashed.
BLADE IS SHARP, PAY ATTENTION DURING ITS HANDLING.
9