Doro CONGRESS 200 Manuel D'utilisation page 6

All manuals and user guides at all-guides.com
English
Redial Button
If the number dialled is engaged or if you wish to redial the last number dialled
(up to a maximum of 32 digits), lift the handset (or press the
the redial button .
r
Timer
Approximately 5 seconds after dialling a timer will be shown on the display. The
timer helps you keep track of how long the call lasts.
Mute Button
The handset/headset microphone can be disabled during a call by pressing
Press once more to reactivate the microphone.
z
On Hook Dialling
.
1. Press The speaker will be activated and the LED indicator will
illuminate.
2. Dial the required telephone number. Adjust the volume, if needed, using the
volume control on the underside of the telephone.
3. Once the call is answered, pick up the handset.
IMPORTANT!
This is not a hands free speaker telephone i.e. there is a microphone in the handset only. When a
headset is fitted the on hook dialling function will not operate.
Hold Button
Press to place a call on hold. The LED next to the button will illuminate.
h
The call can be resumed by pressing
connected to the same line.
1. While on a call.
2. Press to place the telephone call on hold. If the handset is in use it may
h
now be replaced onto the hook switch.
3. To resume the telephone call, lift any handset connected to the same line.
6
Operation
again or from another telephone
h
/ ) and press
=
.
z
www.doro.com