D-Link DGS-1016D Guide D'installation page 3

Link/Act/Speed (1-16) - This LED indicator light is green when the port is
successfully connected to a 1000Mbps device and will blink as data is transmitted
or received. This LED indicator light is amber when the port is successfully
connected to a 10/100Mbps device and will blink as data is transmitted or
received.
Power Indicator - This green indicator light is on when the Switch is receiving
power; otherwise, it is off.
The DGS-1016D can easily be mounted on a rack. Two mounting ears are
provided for this purpose. Make sure that the front panel is exposed in order to
view the LEDs. Please refer to the following illustrations:
1. Attach the ears to each side of the switch, using the screw-holes located on
the side of the device.
2. Firmly attach the ears to the rack as shown. Please follow the usual safety
precautions for rack-mountable products.
3
LEDs
Mount on a Rack
D-Link DGS-1016D Quick Install Guide