Bluetooth Connection - Hama Moments 100 Bluetooth Mode D'emploi

6. Operation
Note
• The functions described in this
section are only available for
Bluetooth-capable terminal devices.
• Note that the max. range of
Bluetooth without any obstacles
such as walls, people, etc. is
10 metres.

6.1. Bluetooth connection

Note - Pairing
• Make sure that your Bluetooth-
capable terminal device is on and
Bluetooth is activated.
• Make sure that your Bluetooth-
capable terminal device is visible for
other Bluetooth devices.
• For more information, please refer
to the operating instructions of your
terminal device.
• Slide the ON/OFF switch to ON.
• The status LED initially illuminates blue,
then switches off for several seconds
before flashing blue.
4
All manuals and user guides at all-guides.com
• This means the Bluetooth remote
• Open the Bluetooth settings on your
• Select hama selfie and wait until
release is searching for a Bluetooth
connection.
terminal device and wait until hama
selfie appears in the list of Bluetooth
devices found.
hama selfie is listed as connected in
the Bluetooth settings on your terminal
device. The status LED (2) switches off.
Note - automatic connection
and possible problems
After the devices have been paired
once, the connection is then
established automatically. If the
Bluetooth connection is not established
automatically, check the following:
• Check the Bluetooth settings of
your terminal device to see whether
hama selfie is connected. If it
is not, repeat the steps described
above.
• Check whether obstacles are
impairing the range. If so, move the
devices closer together.