Hama Moments 100 Bluetooth Mode D'emploi page 5

• Do not open the device or continue to
operate it if it becomes damaged.
• Do not modify the product in any way.
Doing so voids the warranty.
4. System Requirements
The Bluetooth Selfie Moments 100
supports Bluetooth-capable terminal
devices such as smartphones and tablet
PCs that use the iOS 5 or Android 3.0
(or newer) operating systems.
Note
• Note that some terminal devices
may not support this product.
• Please refer to the operating
instructions for the device you
are using.
5. Getting Started
Note
• Use only a suitable charger when
charging the battery. Follow the
charger's operating instructions!
All manuals and user guides at all-guides.com
• The product is equipped with a built-in
• Charge the battery fully before using
• To charge the battery, use the included
• The status LED (2) illuminates red while
• When stored over a long period of
time, batteries should be charged
regularly (at least every three
months).
battery.
the device for the first time.
USB charging cable to connect the
Micro USB charging port on the
product (1) to a USB charger or the USB
port of your notebook/computer (must
be switched on).
the battery is charging and switches off
once the battery is fully charged. If the
battery is dead, the status LED slowly
flashes blue.
Warning – Charging
• As a rule, do not charge devices or
USB connections that are defective
and do not try to repair them yourself.
3