GrillMaster 720-0783 Mode D'emploi page 18

8. Side Burner Grates Assembly
Replace both grates to each side burner. See
Fig.30.
9. Grease Cup Assembly
From the back, pull out grease trays (W & J),
remove any packaging materials from it, then insert
grease cup (X) into grease tray (W) as shown in
Fig.31. Push grease trays back into grill.
10. Installing Cooking Components 10. Installing Cooking Components
(a) Place heat diffusers (P) over burners as shown.
Diffuser ends insert into channels on front and
back of firebox. See Fig.32.
(b) Evenly space cooking grids (R) on the ledge above
heat diffusers. See Fig.32.
To obtain sear marks in cooked meat, be sure to
insert grids so that side with four corner feet faces
down.
(c) Insert legs of warming rack (S) into the holes in the
top of firebox side panels. See Fig.32.
Fig.30
Fig.31
Fig.32
P
18
J
X
W
S
R