GrillMaster 720-0783 Mode D'emploi page 14

Gril au gaz de pétrole liquéfié
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. Side Burner Valve Assembly
(a) Remove two screws from side burner control valve
face. Insert side burner valve control stem through
hole in side burner control panel. Place bezel (T)
over side burner valve control stem. Secure bezel
to control panel and valve with 2 screws removed
above. See Fig.14.
(b) Insert side burner tube over side burner valve
orifice.
See Fig.15A1. Use two Truss head screws (CC)
attaching side burner (N) to shelf to make room to
install side burner valve. See Fig.15A2.
(c) Push control knob (U) onto valve control stem, and
tighten using hex wrench. See Fig.16.
(d) Plug ignition wire into igniter wire hanging from
electrode on underside of burner. See Fig.17.
Fig.17
Fig.14
T
Fig.15
Fig.16
14
N
A2
A1
U

Publicité

Table des Matières
loading

Produits Connexes pour GrillMaster 720-0783

Ce manuel est également adapté pour:

30237516

Table des Matières