Control Panel - Whirlpool AKR 457/1 AL Manuel D'utilisation Et D'entretien

DESCRIPTION AND USE OF HOOD
6

1. Control panel.

6
2. Grease filter.
3. Lamps.
4. Front panel.
5. LEDSTRIP.
6. ON/OFF.
Control Panel
This hood has an ambient light function, coloured using the LEDSTRIP.
To activate this function, press button T1.
The LEDSTRIP control consists of a system which utilises RGB LEDs.
T1. LEDSTRIP control
Press button T1 to enable automatic LEDSTRIP activation, which entails cyclical changes in the lighting colour.
Press T1 again to stop the automatic lighting cycle; then a colour can be selected as desired by briefly pressing it.
Press and hold the button to switch off the LEDSTRIP at any time.
T2. Lights ON/OFF
The T2 button switches the hob light on and off.
T3. Motor OFF – Reduce speed
Press the T3 button while the hood is running to reduce the motor speed; it will eventually come to a stop.
Press and hold the button (at any speed) to switch off the motor.
T4. Motor ON – Select speed
The hood has 3 speed levels, plus an extra intensive timed speed.
Press T4 to activate the hood fan at speed level 1.
Every time it is pressed, the motor speed is increased until the maximum speed level has been reached.
The maximum (or intensive) speed level runs for 5 minutes, after which the hood reverts to the third speed level. The T4 button flashes during this intensive
phase.
IMPORTANT: Condensation may form on the front surface of the hood when cooking food with the hob switched on. In this case, clean the surface of the hood
with a damp cloth after cooking.
Note: to optimise the energy consumption of the product we suggest ALWAYS setting the mode to OFF (6) if the motor is not running.
GB14