Pole Mounting - Laney AH110-G2 Manuel D'utilisation

POLE MOUNTING

All cabinets should be balanced and steady.
Don't over-extend poles/tripods; ensure at least 4 x the pole diameter is still inside the outer pole.
Make sure the legs have a good splay on tripods, but do not obstruct doorways or other access-ways.
If a pole mount is used, make sure that the thumb screw on the cabinet is tight.
Keep lights away from speakers; heat can cause fires / speaker damage.
Don't run cables across access-ways; if you have to, run them above doors or use approved cable covers.
Be aware of total power usage. Overloading a mains socket is potentially dangerous, and likely to cause a
power out during use.
Keep lighting cables away from ALL sound cables including mains, use separate circuit for lights if possible.
Keep power and signal cables apart.
Thumb screw
(Stand not included)
35mm pole cup
10