Proctor Silex 41006 Mode D'emploi page 4

How to Use the Kettle
1
5
Kettle will automatically shut
off when water has boiled.
4
840284000 EN_2017-06-02.indd 4
2
6
Unplug the kettle from the outlet
and let the kettle cool down
before removing mesh filter.
w CAUTION
Burn Hazard.
Do not overfill kettle. Boiling water may spit out of the spout.
3
TO REMOVE MESH FILTER
The mesh filter may be removed
by pulling up on the filter tab,
which is visible through the kettle
opening, pushing it away from
the spout, and lifting the filter up.
Rinse filter under running water
and brush with a soft brush. An
old, clean toothbrush works well.
4
TO REPLACE MESH FILTER
To replace the mesh filter, place
the filter down into the spout
and press down on the filter tab.
Push the filter forward until the
filter tab latches into the kettle
opening.
6/7/2017 2:11:40 PM