FACTO F-2020 Manuel D'utilisation page 3

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. Carry Handle
2. Control Dial
3. Blades
4. Front Grille
5. Rear Grille (at back of fan)
6. Base
7. Plastic Feet (2x)
1. Remove fan from packaging and select a firm, level surface to locate the fan on.
2. Break apart the two plastic feet (as shown in Figure 1)
3. On the back of the fan, slide feet into slots in bottom of metal housing until they snap into
position (as shown in Figure 2)
4. The fan is now ready to operate.
CAUTION: ATTACH FEET BEFORE OPERATION. DO NOT OPERATE WITH FEET MISSING.
Ensure the fan is in the OFF position before plugging into a 120V/60Hz outlet.
This fan has a 4 position dial control located at the top of the fan:
0. in this position, the fan is powered OFF
1 in this position, the fan is powered ON, operating at a low speed setting.
2 in this position, the fan is powered ON, operating at a medium speed setting.
3 in this position, the fan is powered ON, operating at a high speed setting.
63545010
F-2020
PARTS OF THE FAN
ASSEMBLY
FIGURE 1
OPERATING INSTRUCTIONS
FIGURE 2
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

63545010

Table des Matières