Assembly And Use For The Bowl - Ninja BL771 Manuel Du Propriétaire

Assembly and Use for the Bowl

WARNING: Never leave the appliance unattended while in use.
ASSEMBLY ASSEMBLY
Fig. 1
Fig. 2
IMPORTANT: Make sure that the motor
base is plugged in for use.
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
2 Align and lower the Bowl onto the motor
base. (Fig. 1) Handle should be aligned
slightly to the right of the "LOCK" symbol on
the motor base.
3 Rotate the bowl clockwise as far as it will go
to lock in place. (Fig. 2)
4 The bowl can be placed on the motor base
two ways; the handle can be on the front right
corner or the front left corner.
(Fig. 3a, Fig. 3b)
5 Holding the desired blade by the top of the
shaft, place it onto the drive gear inside the
bowl. Ensure that the attachment is seated
properly and is standing upright. (Fig. 4)
NOTE: The blade will fit loosely on the drive
gear.
6 Add the ingredients to the bowl, making sure
that they do not exceed the highest measured
marking line on the side of the bowl.
16 1.877.646.5288
All manuals and user guides at all-guides.com
7 Plug the power cord into the electrical outlet
8 Holding the lid by the handle in the upright
Fig. 3a
Fig. 3b
and press the power button ( ).
NOTE: As a safety feature, the power
button ( ) will flash and the motor will
not work if the bowl and lid are not
installed correctly. When the bowl and
lid are installed properly, the power
button ( ) will be solid, indicating that
the appliance is ready for use.
position, place it on top of the bowl aligning
the arrow ( ) located on the lid with the
arrow ( ) located on the bowl's handle.
(Fig. 5) Press the handle down until you hear
a click.
NOTE: The 64 oz. bowl is not intended for
blending drinks. Do not overfill.
NOTE: To add liquids during
processing, open the drizzle
hole on the top of the lid and
pour the liquid slowly into the
mixture.
Fig. 4
Fig. 5