Package Contents; System Requirements - Hama Nano Mode D'emploi

g Operating Instruction

Package contents

• Nano DVB-T USB 2.0 dongle
• 3 exchangeable silicon cases in white, blue and pink
• Passive DVB-T rod antenna with magnetic stand
• Antenna converter
• CD-ROM with driver and software
• This printed "Quick Start" operating manual
Note: The complete documentation is contained in a PDF
file in the MAGIX TV & Video Recorder program directo-
ry. You can read it on the computer screen or print it out.
This requires the "Adobe Reader" PDF display program,
which you can download from the Internet free of char-
ge (in case it is not already installed on your computer).
Tip: Depending on the signal strength, you may only be
able to receive a limited number of channels with the
supplied antenna. If you do see a lot of interference, we
recommend that you use an active antenna, which you
can purchase in an electronics specialty store. If you
still have an old indoor antenna, you should be able to
connect it to the USB stick.

System requirements:

For Microsoft® Windows® XP/Vista/7
Minimum configuration:
• Intel Pentium IV or AMD Athlon XP (1 GHz and higher)
• 512 MB of RAM
• 1 GB of hard drive space for program installation and
DVB recording
• A free USB 2.0 port
• Graphics card with a screen resolution of at least
1024 x 768
• Sound card
How to find out whether your computer meets the
necessary requirements:
1. Click Start, and then select Run...
2. Enter "dxdiag" in the field and confirm your entry
with OK.
3. Select the System tab. The Processor entry indicates
what type of CPU your computer has.
Other information on your computer can be found in the
Control Panel on your Windows system.
Installing the driver and software:
The installation wizard will take you through the instal-
lation procedure step-by-step. During the process, read
the displayed information and instructions. Depending
on which operating system you are using, the questions
you see may differ from those listed here.
Note: Install the driver for the Nano DVB-T dongle
before you connect the hardware.
1. Switch on your PC/notebook computer and start
Windows. Close all running applications.
2. Insert the installation CD.
The CD starts automatically and then the Autoplay
selection menu appears on the screen.
Select the option Run autorun.exe.
Note: If the CD-ROM on your computer does not start
automatically, open My Computer, select the CD-ROM
drive, and double-click the Autorun.exe file to start it.
11