LENCO SCD-68 DAB+ Mode D'emploi page 12

automatically if no keys are being pressed in this time frame.
 During the alarm on mode, pressing the "on/off" button (17) will switch off the system.
 Due to display size limitation, the timer icon " " will not appear on LCD during operate FM/DAB mode.
6 Specification
Power source : AC 230V/50Hz
Speakers : 4Ohm X 2
Aux IN : 3.5mm dia.
Accessories supplied : AC cord
7 Remark (for Europe market only)
Due to ErP stage two requirement and protect the environment, the unit will switch to the standby mode
automatically once no music has been playing over 15 minutes.
8 Guarantee
Lenco offers service and warranty in accordance with the European law, which means that in case of repairs
(both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty
expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the
manufacturer will be voided.
9 Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction,
specifications and pictures in this documentation may differ slightly from your particular situation. All items
described in this guide are for illustration purposes only and may not apply to particular situation. No legal
right or entitlements may be obtained from the description made in this manual.
10 Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as
general household waste in Europe. To ensure the correct waste treatment of the product and
battery, please dispose them in accordance to any applicable local laws of requirement for
disposal of electrical equipment or batteries. In so doing, you will help to conserve natural
resources and improve standards of environmental protection in treatment and disposal of
electrical waste (Waste Electrical and Electronic Equipment Directive).
11 CE Marking
Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage
Directive (2006/95/EC) issued by the Commission of the European Community.
Hereby, Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is
in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The declaration of conformity may be consulted via
12 Service
For more information and helpdesk support, please visit
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB, The Netherlands.
All manuals and user guides at all-guides.com
techdoc@lenco.com
www.lenco.com
12