Auxiliary Input; Additional Information; Troubleshooting Tips - RCA Ri171 Guide De L'utilisateur

Note:
• When the unit is AC-powered, the iPod / iPhone will
charge automatically (until fully charged) once it is
docked in the cradle.
• Note that the use of this accessory with iPod or iPhone
may affect wireless performance.
• When playing iPod / iPhone, you can use the MENU,
, or ENTER button to navigate the iPod / iPhone
menu.
Pausing Playback
• Press the button.
• To resume playback, press the
Skipping to a Another Track
• Press either the or
desired direction.
• Press the button to skip to the beginning of the
current track or previous track. Press
skip to the beginning of the next track.
Locating a Particular Point on a Track
• Keep either the or
playback, according to the desired direction, and
release at the desired point.
Note: Please refer to the user's guide that was
included with your iPod/iPhone for more details.

Auxiliary input

1. Connect the auxiliary device to the AUX IN jack
with an audio cable (not provided).
2. Press SOURCE until the indicator "
the display.
3. Start playback from the auxiliary device.
4. Adjust the auxiliary device to mid-range volume
and adjust the master volume by pressing
VOLUME .
• Do not turn the volume of the auxiliary device too
high as this may affect the sound quality.
• For other playback operations, control them on your
auxiliary device.

Troubleshooting Tips

System doesn't turn on
• Unplug the unit for a moment, and then plug it back
in.
• Check the outlet by plugging in another devices.
No sound
• Adjust volume setting.
• Make sure you've selected the correct function.
Poor radio reception
• Make sure FM antenna wire is fully extended.
• Try turning off electrical appliances near the unit,
such as hair dryers, vacuum cleaners or fl uorescent
lights.
All manuals and user guides at all-guides.com
button again.
button according to the
button to
button pressed during
" lights on
EN - 5
iPhone/iPod does not dock properly or does not
install properly
• Remove your iPhone/iPod from the dock and check
for obstruction on the connectors in the dock and
on your iPhone/iPod. Make sure you are using the
appropriate adapter for your model of iPhone/iPod.
iPhone/iPod does not respond to the speaker sys-
tem.
• Make sure that your iPhone/iPod is working prop-
erly before docking into the unit. Please refer to
your iPhone/iPod manual for details.
ESD Remark:
In case of misfunction due to electrostatic discharge
just reset the product (disconnect and reconnect of
the power source may be required) to resume normal
operation.

Additional Information

Cleaning the exterior
• Disconnect the system from AC power before clean-
ing the exterior of the unit with a soft dust cloth.
• Clean the exterior with a soft clean cloth or slightly
moistened chamois leather. DO NOT use solvents
as it may cause damage to the unit.