Publicité
Les langues disponibles
Les langues disponibles
F R O N T PA N E L
1.
Display 3 1/2 digit, 7 segment, 15mm high LCD.
2.
Rotary switch. This switch is used to select functions
and desired ranges as well as to turn on/off the meter.
3.
Hold button: When this button is pushed, the display will
keep the last reading and "" symbol will appear on the
LCD until pushing it again.
4.
"10A" jack: Plug in connector for red test lead for
10A measurement.
5.
"COM" jack: Plug in connector for black (negative) test lead.
6.
"VΩmA" jack: Plug in connector for red (positive) test
lead for voltage, resistance and current (except 10A)
measurements.
Operating mode
DC Voltage
AC Voltage
DC Current
D I O D E
Range
Description
Shows the approx. forward voltage drop of the diode
Overload Protection: 250 V dc. or rms. ac.
T R A N S I S T O R H F E T E S T ( 0 -1 0 0 0 )
Range
NPN und PNP
10
Range
Resolution
200 mV
0.1 mV
2 V
0.1 mV
20 V
0.1 mV
200 V
100 mV
500 V
1 V
200 V
100 mV
500 V
1 V
200 µA
0.1 µA
2 mA
1 µA
20 mA
10 µA
200 mA
100 µA
10 A
10 mA
Test Range
Test Current Test Voltage
0-1000
lb=10µA
Accuracy
+/-(0,5 % +/- 2dgts)
+/-(0,5 % +/- 2dgts)
+/-(0,5 % +/- 2dgts)
+/-(0,5 % +/- 2dgts)
+/-(0,8 % +/- 2dgts)
+/-(1,2 % +/- 10dgts)
+/-(1,2 % +/- 10dgts)
+/-(1,0 % +/- 10dgts)
+/-(1,0 % +/- 10dgts)
+/-(1,0 % +/- 10dgts)
+/-(1,5 % +/- 10dgts)
+/-(3,0 % +/- 10dgts)
Vce=3V
Overload Protection: 250V rms.
For 200mV range and 500V dc or
rms. ac for other ranges.
Overload Protection: 500V dc or
rms. ac for all ranges
Frequency range: 40 Hz to 400 Hz
Response: Average responding,
calibrated in rms. of a sine wave
Overload Protection:
FH 500 mA/500V 10A/500V
Publicité
