Led Indicators; Connection Diagram - Axis 247S Guide D'installation

AXIS 247S Installation Guide
Line/Mic in - 3.5mm input for a mono microphone, or a line-in mono signal (left channel is
used from a stereo signal).
Power out - Used to power a camera or other auxiliary equipment 12V DC,
max. load 5W (420mA)
Important!
• Do not connect more than one video/audio source as the AXIS 247S is a one-channel
video server and can only accommodate one video/audio stream.
• The AXIS 247S can deliver a maximum of 5W (420mA) to a camera (power out) and
50mA from the I/O terminal connector.

LED indicators

LED Color
Network Green
Amber
Unlit
Status Green
Amber
Red
Power Green
Amber

Connection diagram

12V
max. 50mA
Indication
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to 10 Mbit/s network. Flashes for network activity.
No network connection.
Steady green for normal operation.
Steady during startup, during reset to factory default or when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
AXIS 247S
1
o
e.g. pushbutton
2
o
3
o
4
o
Page 11
+
GND