AQUA FORTE MR. SILENCE Manuel De Fonctionnement page 96

Attention:
a. Standby mode or Screen lock：Only "
b. Power off：Only "
c. The controller has power-saving function.
2. Operation Instruction
a. Screen Lock
1) Press " " for 3 seconds to lock or unlock the screen
2) Automatic Lock Period: 30 seconds if no operation
b. Power On
Press " " for 3 seconds to unlock screen. Press "
c. Temperature Setting
Press " " and "
d. Mode Selection
1) Press " " to switch among heating "
Heating mode " ": Water setting range(18-40℃)
Cooling mode " ": Water setting range(12~30℃)
Automatic heating/cooling mode "
* When water inlet temperature is higher than setting point, automatic cooling mode starts.
* When water inlet temperature is lower than setting point, automatic heating mode starts.
2）Press " " to switch among boost mode
Default mode: boost
Please choose boost mode
e. Wi-Fi " "
When the screen is on, press "
Connect Wi-Fi on mobile phone and input password, and then control equipment by Wi-Fi. When APP
connects Wi-Fi successfully，"
Clear Wi-Fi setting history: When screen is on, press "
seconds, " " lights off.
" light up, no display on screen.
" to display and set temperature.
": Water setting range(12~40℃)
for initial heating
"for 3 seconds, after "
" lights on.
" light up, screen and other buttons turn dark.
" to power on machine.
", cooling " " and automatic mode "
, silence mode
" flashing, enter Wi-Fi connection.
" for 10 seconds, after "
11
".
" flashing for 10