Livassured NightWatch Mode D'emploi page 61

PLEASE NOTE: The arm module cannot
charge when it is switched OFF. Always
leave the arm module switched ON when it
is connected to the charger.
The white upper side of the arm module contains
one indicator light (C), used for several signals.
Read about these signals in Chapter 6.
NightWatch
4.2 Basisstation
The square white box is the base station that
displays both light and sound signals. The base
station can be placed anywhere in the home near
a power outlet. However, ensure that you can
hear the sound signal from the base station and
that it is loud enough to wake you up at night.
This distance between the arm module and base
station is limited to 15 meters. The device will
notify the user when arm module and base station
are too far apart and loose connection (Chapter 6).
A
A A = Volume controls, 1 increases the volume, = Volume controls, 1 increases the volume, = Volume controls, 1 increases the volume,
2 decreases the volume.
B = Loudspeaker
C
= Power supply
D = LED indicator lights
E = Data connection (optional)
v5.3
C
B
D
EN EN
E
61