Recording - Sherwood AX-5505 Manuel D'utilisation

AX5505(G-Eng)100204_AX5505(Eng).qxp 2010-02-23 오후 2:04 페이지 11

RECORDING

• The volume and tone (bass, treble) settings, etc. have no effect on the recording signals.
Recording with TAPE 1/MD
1.
Select the desired input as recording source
except for TAPE 1/MD and TAPE 2 MONITOR.
• Be sure that the TAPE 2 MONITOR indicator
goes off.
2.
Start recording on the tape deck or the MD
recorder connected to TAPE 1/MD.
3.
Start play on the desired input.
or
Recording with TAPE 2 MONITOR
1.
Select the desired input as recording source
except for TAPE 2 MONITOR.
or
2.
Set the TAPE 2 MONITOR button to on.
or
3.
Stat recording on the tape deck connected to
TAPE 2 MONITOR.
4.
Start play on the desired input.
• When the TAPE 1/MD is selected as recording
sources, dubbing will start from TAPE 1/MD to
TAPE 2 MONITOR.
• It is not possible to dub from TAPE 2 MONITOR to
TAPE 1/MD.
• For tape monitor function, refer to "TAPE
MONITOR function" on page 9.
11