Cleaning And Maintenance - Bellux BX5203 Mode D'emploi

All manuals and user guides at all-guides.com

CLEANING AND MAINTENANCE

▪ Clean the dust container and filter after every use:
▪ Open the dust container by pressing the
unlock button.
▪ Remove the filter from the dust container.
Empty the dust container in the dust bin.
▪ Tap the filter so that the dust comes out and
clean it with lukewarm water. Make sure that
the filter is completely dry before replacing it
into the dust container.
▪ Correctly replace the filter and dust container before using the appliance. Press
and hold the unlock button to be able to correctly replace the dust container onto
the hand vac.
▪ Do not use any solvents or abrasive, agressive or chemical cleaners to clean the appliance.
▪ Clean the plastic housing with a damp, soft cloth, if necessary with a little mild hand soap.
▪ Make sure that no liquid enters the air outlet.
POSSIBLE SOLUTIONS IN CASE OF PROBLEMS
NO SUCTION POWER
▪ The filter is too dirty. Clean the filter.
▪ The air inlet is blocked. Make sure that the air can enter again through the nozzle.
▪ The dust container is not assembled correctly onto the hand vac.
THE APPLIANCE DOES NOT WORK
▪ Make sure that the plug is properly connected to the 12V socket.
▪
The appliance is broken. Return it to a qualified service center for repair.
THE APPLIANCE MAKES A FUNNY NOISE
▪ There is something wrong with the motor fan. Bring the appliance to a qualified service
center for repair.
THE DUST CONTAINER CAN NOT BE PLACED CORRECTLY ONTO THE HAND VAC
▪ Make sure that the filter is installed well into the dust container.
▪ Press and hold the unlock button to be able to install the dust container correctly onto the
hand vac.
Bellux
33
EN