Twin-Star International 23WM376 Instructions D'assemblage page 6

DVD Mantel
INSTALL
INSERT
FROM
BACK
ELECTRIC
FIREPLACE INSERT
E-5
All manuals and user guides at all-guides.com
F
Screw
Q
F
COMPLETED
UNIT
S
M
L
6. Locate Center Back Panel (F), attached
to the center back of the completed
assembly, using a Phillips Head screw
driver, screw screws (Q) through the
pre-drilled holes in the Center Back
Panel to the completed assembly.
PLEASE READ ALL "ELECTRIC
FIREPLACE INSERT" INSTRUC-
TIONS PRIOR TO INSTALLING
ELECTRIC INSERT IN YOUR
COMPLETED FIREPLACE
MANTEL. INSTALL THE INSERT
IN YOUR FIREPLACE CLOSE TO
ITS FINAL POSITION.
7. Lift insert carefully into the back
of the unit and center in the insert
opening. Do not drag insert across
Base/Hearth as it may scratch your
unit.
8. Connect the insert support bar (S) to the
inside Left and Right panels, using the
Bolts (L) and washers (M) through pre-
drilled holes.
MOVE YOUR COMPLETED UNIT
ONLY SHORT DISTANCES. MOVE
COMPLETED UNIT WITH GREAT
CARE. IT TAKES TWO PEOPLE TO
MOVE COMPLETED UNIT INTO ITS
POSITION.
Twin-Star International, Inc.
Delray Beach, FL 33483
In English: 1-866-661-1218
In French: 1-866-374-9203
In Spanish: 1-866-661-1218
Model# 23WM376
Made in China
Printed in China
© 2007, Twin-Star International, Inc.