Cambium Networks PTP 670 Serie Mode D'emploi page 31

Form a drip loop on the PSU end of the LPU to PSU drop cable. The drip loop ensures that any moisture
that runs down the cable into the cabinet or enclosure cannot enter the PSU.
(a) Undo the retaining screw, hinge back the cover and plug the drop cable into the port.
(b) Close the cover and secure with the screw.
(c) When the system is ready for network connection, connect the network Cat5e cable to the LAN port
of the PSU:
(a) (b) and (c)
PAGE 31
PTP 670 QUICK START GUIDE