Mounting The Fireplace - RealFlame Meridian 730 Instructions D'assemblage

Step Two
Mounting the Envision Fireplace to
the bracket:
Figure 2:
Place the fireplace on the wall over the
bracket as shown. The inside of the top
should be resting on the bracket. Bracket
will fit inside of the fireplace and will not
be seen when attached.
Center the fireplace on the bracket so
that the two holes in the top and bottom
of the fireplace line up with the holes in
Wall
the bracket.
Stud
Figure 3:
Using the two 10-32 - 3/4" machine
screws (D), attach the fireplace to the bracket
Drywall
Figure 2
at the top. Be careful not to overtighten
the screws.
D
Repeat with two screws on the
bottom of the fireplace.
D
Figure 3
6