Renkforce HEADUNiT CD-3308 Notice D'emploi page 47

All manuals and user guides at all-guides.com
Mechanical Installation
Remove and Replace the Front Control Panel
The front control panel can be removed to prevent theft.
• Before you remove the front control panel, press the PWR button (1) to turn the
product off.
• Press the REL button (16) and remove the control panel by pulling it out as illustrated
in the picture on the right.
• For replacing the control panel, place the left side into the front of the unit as
illustrated in the lower picture and press slightly onto the right side of the front control
panel until it locks.
• Do not press on the display or the buttons.
A
Make sure to insert the front control panel in the correct way.
Do not press the front too much against the unit. You can easily put it back by
pressing slightly on the device.
When you remove the front control panel, please put it into the supplied
protective cover.
B
ENGLISH
Version 11/06
47