United States Stove Company KP60 Mode D'emploi page 2

Your pellet stove has been approved for installation in the USA and Canada. It may also be installed in a manufactured
or mobile home. Your stove is Certified to ASTM E1509-12 (2017) and Certified. This manual describes the installation
and operation of the USSC, KP60 pellet stove. This heater meets the 2020 U.S. Environmental Protection Agency's crib
wood emission limits for wood-heaters sold after May 15, 2020. Under specific EPA test conditions burning Douglas
Fir dimensional lumber this heater has been shown to deliver heat at a rate of 8,476 to 20,700 Btu/hr. This heater
achieved a particulate emissions rate of 1.5 g/hr when tested to method ASTM E 2779 and 66% efficiency.
Heating Specifications
Fuel Burn Rate* (lowest setting) 1.5 lbs./hr.
Burn Time (lowest setting)
Hopper Capacity
Electrical Specifications
Electrical Rating
Watts (operational)
Watts (igniter running)
Dimensions
Overall: Height x Width X Depth 32.8" (834 mm) X 21" (534 mm) X 23.77" (604 mm)
Weight
IT IS AGAINST FEDERAL REGULATIONS TO OPERATE THIS WOOD HEATER IN A MANNER INCONSISTENT
WITH THE OPERATING INSTRUCTIONS IN THE OWNER'S MANUAL.
Note: Register your product online at
www.usstove.com
app today. This app is available only
on the App Store for iPhone and iPad.
Search US Stove. Save your receipt with
your records for any claims.
© 2021 United States Stove Company
* Pellet size may effect the actual rate of fuel feed and
32 hrs. (approximate) burn times. Fuel feed rates may vary by as much as 20%.
Use PFI listed fuel for best results.
60 lbs (27.2 kg)
120V, 60 Hz, 3.0 Amps
180W
350W
145 lbs (65.8 kg)
WARNING:
or download the free
INTRODUCTION
For Customer Service, please call:
1-800-750-2723 Ext 5050 or;
Text to 423-301-5624 or;
Email us at:
customerservice@usstove.com
2