Technical Assistance; Installation Preparation - Hoover BI SD 177 Manuel D'utilisation

If ice has formed on the back wall of the fridge:
•It is normal for some ice droplets to form on the back wall of the fridge. This does not constitute a
fault with the appliance.
•Ensure that no items inside the fridge are in contact with the back wall.
•Check that there is some resistance when opening the door of the appliance. If it opens at the
slightest touch it may mean that the door seal needs to be replaced.
•Check the door seal for any kinks, debris or damage. If you notice any, and are unable to resolve
the issue yourself, contact Customer Care so that the seal can be replaced.
•This can be due to the decor door(s) not being properly fitted. If you are at all unsure, ask your
fitter to check the decor doors.
If the LED unit within the appliance is not working:
•Contact Customer Care to arrange a service visit.

Technical assistance

To contact the technical assistance, visit our website: https://corporate.haier-europe.com/en/
Under the section "website", choose the brand of your product and your country. You will be
redirected to the specific website where you can find the telephone number and form to contact
the technical assistance

Installation preparation

This appliance must never be installed close to heat sources, e.g. heating elements or cookers,
nor in damp places.
Seek the help of another individual, or two, when installing
this appliance. This appliance may have sharp edges. Wear
adequate PPE for the task and environment.
•To ensure the appliance is level, you should use the height
adjustable feet at the front of the appliance.
•The cooling system at the rear of the appliance must not touch
the rear wall. The greater the gap, the better.
•The appliance must be installed with adequate ventilation.
Ensure that there is clearance above the appliance to allow air
to escape and that there is space between the rear of the
appliance and the wall.
Install the appliance at a location where the ambient
temperature corresponds to the climate class indicated on the
rating plate of the appliance:
- Extended temperate (SN): 'this refrigerating appliance is
intended to be used at ambient temperatures ranging from 10
°C to 32 °C'
- Temperate (N): 'this refrigerating appliance is intended to be
used at ambient temperatures ranging from 16 °C to 32 °C'
15