Description Of Symbols - Kawasaki K-EHD 1050 Traduction De La Notice Originale

chisel bits or drill bits etc.
• Protect eyes and assistants from small flying
parts and splinters. Wear a helmet!
Erect a screen wall!
• Work gloves protect you against skin abrasions.
• Vibrations can be harmful to the hand-arm
system: Keep the impact time of vibrations to a
minimum.
• Always keep the power cable away from where
you want to drill.
• Keep the machine out of children's reach.
• Always hold the machine with two hands when
it is running and make sure of your footing.
• Make sure that the switch on the machine is
set to the correct position for the work you
want to perform before you put the machine
into operation. If the switch is not in the correct
position you risk suffering bodily injury when the
machine starts to run.
Save this instructions.
All manuals and user guides at all-guides.com

3. Description of symbols

Pay attention to all the signs and symbols shown
in these instructions and on your tool.
Make a note of these signs and symbols. If you
interpret the signs and symbols correctly, your
work with the machine will be safer and better.
Important.
Read the instructions for use before
starting the machine.
Wear safety goggles.
Wear ear protection.
Wear good quality, strong gloves.
Always use breathing apparatus when
machining materials which generate
dust.
End of life machines contain valuable
materials and therefore they should not
be placed in household waste.
We would ask you to play your part in
protecting resources and help protect
the environment by returning this
machine to a return point (if one is
available) when it reaches the end of its
life.
Select between the individual functions
only when the equipment is
at a standstill. If you fail to observe this
point, the equipment may be
damaged.
17
GB