Nicols PAR LED 73 RGB Notice D'utilisation page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
AUTO running mode :
2.
Press MODE, when AUTO is on, press SETUP. You'll be able to adjust running speed, strobe speed and effects.
MASTER/SLAVE mode
3.
To set the device under SLAVE mode, press on MODE until SLAv is on.
SOUND-ACTIVE MODE
4.
f.
Press on MODE until
g. Adjust sound sensitivity from SU00 to SU31 with UP and DOWN buttons
STATIC COLOR mode
5.
a. Press on MODE until "Colr" is on, then press SETUP
b. Adjust brightness of RED with UP and DOWN buttons from r000 to r255
c. Adjust brightness of GREEN with UP and DOWN buttons from g000 to g255
d. Adjust brightness of BLUE with UP and DOWN buttons from b000 to b255
e. Adjust flash speed with UP and DOWN buttons from F-00 à F-99
DMX mode
6.
a. Press MODE, when "d.001" is on, press SETUP.
b. 1
subfolder: set a DMX address with UP and DOWN buttons from d001 to d512.
st
c. 2
subfolder: set a DMX channel with UP and DOWN buttons: 3-ch, 6-ch or 7-ch
nd
DMX MODE 1 : 3-ch
CHANNEL
VALUE
1
0-255
2
0-255
3
0-255
DMX MODE 2 : 6-ch
CHANNEL
VALUE
1
0-255
2
0-255
3
0-255
4
0-255
0-10
5
11-255
0-9
6
11-255
0-255
DMX MODE 3 : 7-ch
CHANNEL
VALUE
1
0-255
2
0-255
3
0-255
4
0-255
0-24
25-49
50-74
75-99
5
100-124
125-149
150-174
175-199
200-255
6
0-255
7
0-255
is on, then press SETUP.
FUNCTION
Red 0-100%
Green 0-100%
Blue 0-100%
FUNCTION
Dimming
Red 0-100%
Green 0-100%
Blue 0-100%
No function
Sound-Active Mode
No function
Strobe (CH1-CH4), high value = high speed
Sensitivity in Sound-Active Mode
FUNCTION
Dimming
Red 0-100%
Green 0-100%
Blue 0-100%
Strobe
AUTO
Program 02
Program 03
Program 04
Program 05
Program 06
Program 07
Sound-Active Mode
Running Speed of programs. high value = high speed
Strobe speed. high value = high speed

Publicité

Table des Matières
loading

Table des Matières