Ramili baby RA300 Manuel De L'utilisateur page 13

PARENT UNIT (PU)
1. Long press the power ON/OFF
light up for approximately 5 seconds. If no key is pressed, the LCD backlight will
automatically turn off to save battery power. To switch off the unit, long press the
button again.
2. While the LCD is lit, touch the function keys to use the unit, as the keys will not
respond when the LCD backlight has turned off.
N.B. It is recommended to touch at the center of each key, avoid touching two
keys at the same time.
3. To activate the LCD backlight at anytime, short press the
4. To enter the menu, press the
display will show the following:
Use the keys to move the cursor
the key to confirm.
Menu > Language
5 languages are available: English, German, French, Russian and Italian.
Use the keys to select, then touch
short press the
Menu > Name
Depending on how many BUs you have paired to the PU, the corresponding baby
unit number will show up on the LCD as BABY 1, BABY 2, BABY 3 or BABY 4.
Please note that only the baby unit number that has been paired will show up.
Use the keys to select the BU which is intended to be given a name, then
touch the key to confirm the choice and the LCD will show the following:
User Instructions
All manuals and user guides at all-guides.com
button to switch on the unit, the LCD will
key for more than 3 seconds, and the LCD
button to confirm and exit the menu.
EN
button.
Steady
Flashing
to the item to be selected, then touch
key to confirm and return to menu or
13