Charging The Product; Making Phone Calls - nedis HPBT2052WT Guide De Démarrage Rapide

Do not short circuit.
•
Do not repair the product. If damaged, it must be properly
•
disposed of.
Pairing the earphones to a Bluetooth audio
source
1. Take the earphones out of the charging case. The earphones
switch on automatically.
4
Tap and hold both earphone touch controls A
seconds to manually switch on the earphones.
2. One of the status indicator LED A
indicate pairing mode is active.
3. Enable Bluetooth on the device you want to pair the
earphones with.
4. Select "HPBT2052WT" from the list of available Bluetooth
devices on your device.

Charging the product

1. Plug the Micro USB cable A
of the charging case.
2. Plug the other end of A
adapter.
3. Plug the power adapter into a power outlet.
4
The charging indicator LED A
progress of the battery.
4. Place the earphones into the respective slots A
close the lid A
5. The status indicator LED A
red.
6
6. A switches off when the earphones are fully charged.
4
The earphones and the charging case can charge
simultaneously.

Making phone calls

With the earphones connected to a mobile phone via
Bluetooth, phone calls will automatically be redirected to the
earphones.
To answer an incoming call, tap A
•
To reject an incoming call, tap and hold A
•
seconds.
To end a call, tap A
•
Controlling the music
5
• Tap A or A
Double tap A
•
Double tap A
•
9
9
into a computer or power
1
to charge the earphones.
6
5 q
or A
q
to play or pause the music.
q
to skip to the next track.
5
to skip to the previous track.
6
blinks red and blue to
into the Micro USB port A
4
indicates the charging
on the earphones lights up
5 q
or A
5
.
6
5 q
for 2
A
2
3 8
and
A
.
q
or A for 2