Charging The Product; Making Phone Calls - nedis HPBT3052WT Guide De Démarrage Rapide

•
This product is equipped with a non-removable internal
battery. Do not attempt to replace the battery yourself.
•
Do not short circuit.
•
Do not repair the product. If damaged, it must be properly
disposed of.
Pairing the earphones to a Bluetooth audio
source
1. Take the earphones out of the charging case. The earphones
switch on automatically.
4
Press and hold both earphone buttons A
seconds to switch the earphones on manually.
2. The status indicator LED A
indicate pairing mode is active.
3. Enable Bluetooth on the device you want to pair the
earphones with.
4. Select "HPBT3052WT" from the list of available Bluetooth
devices on your device.

Charging the product

1. Plug the Micro USB cable A
of the charging case.
2. Plug the other end of A
adapter.
3. Plug the power adapter into a power outlet.
4
The charging indicator LED A
charging.
4
4 A
switches off when the case is fully charged.
4. Place the earphones into the respective slots A
close the lid A
5. The status indicator LED A
red.
5
6. A
switches off when the earphones are fully charged.
4
The earphones and the charging case can charge
simultaneously.

Making phone calls

With the earphones connected to a mobile phone via
Bluetooth, phone calls will automatically be redirected to the
earphones.
• To answer an incoming call, press A
• To reject an incoming call, press and hold A
seconds.
• To end a call, press A
5
9
9
into a computer or power
1
to charge the earphones.
5
6
or A
6
6
blinks red and blue to
into the Micro USB port A
4
lights up red when
on the earphones lights up
6
or A
8
.
8
A
for 2
2
3 7
A
and
8
.
6 8
or A
for 2