Thermor Emotion digital DE 500 Notice D'installation Et D'utilisation page 41

All manuals and user guides at all-guides.com
PROGRAMMING THE HEATING PERIOD:
You can program your Comfort
prestored programs, or by connecting the pilot wire to a programming control (Pilot wire (FP) mode
is the default setting - refer to your programming control's manual)
You can connect several appliances to one programmer.
3 programs have been prestored:
0h 1h 2h 3h
is recommended for when you are constantly at home, at the weekend for example (Eco mode
from 23h to 5h, Comfort mode from 5h to 23h).
is recommended if you are absent during the day (Eco mode from 23h to 5h and from 9h to
17h, Comfort mode from 5h to 9h and from 17h to 23h).
is recommended if you are absent during the day, but you come back home at lunchtime (Eco
mode from 23h to 5h, from 9h to 12h and from 14h to 17h, Comfort mode from 5h to 9h, from
12h to 14h and from 17h to 23h).
means that a programming control is used.
NB : If no command is received on the pilot wire, the device will function in Comfort mode.
When switching from Comfort to Eco mode, the new mode is active after about 12 seconds.
The Frost Protection and Load shedding commands have priority over the Eco, Comfort and pro-
gramming (P1, P2, P3 and
HOW TO USE PROG MODE
and temperature times either by using one of the three
, and
4h 5h 6h 7h 8h 9h
10h
) modes.
and they cannot be changed.
11h 12h 13h 14h 15h 16h
39
PROG
17h 18h 19h 20h 21h 22h
GB
23h